GW INSTEK GPT-9800 seri Electrical Safety Tester (200VA, 6000V AC/DC, IR)
A Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing
GW Instek is launching to the market a series of safety tester (hi-pot tester/hipot tester) with high durability and multiple user-protection design. The GPT-9800 supports the major test items among all the needed for the compliance of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations.
A total of 4 safety testers in the GPT-9800 Series, namely GPT-9804, GPT-9803, GPT-9802 and GPT-9801, are available for various applications. The GPT-9804 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests. The GPT-9803 is a 3-in-1 model capable of performing AC withstanding, DC withstanding as well as insulation resistance tests. The GPT-9802 is capable of performing both AC and DC withstanding tests, whereas the GPT-9801 is able to perform AC withstanding test. The series of safety tester is built upon a high-efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede the influence from the voltage fluctuation of the input AC source. This ensures a stable voltage supply for all the tests of the GPT-9800 Series.
Targeting user’s protections, the GPT-9800 series uses a combination of hardware and software controls to improve safety: A self-check is performed to make sure all the functions and operations are under normal condition each time when the tester is turned on; the Zero Crossing Turn-On design imposes the output voltage to always begin at the zero crossing of a sine wave to avoid the impact of surge voltage output; and the output voltage is automatically cut off (within 150μs) when abnormal output voltages have been detected or when the upper or lower current limits have been reached during testing. To protect operator from hazardous injury, the GPT-9800 Series automatically discharges the DUT after test (within 200ms) each time to eliminate excessive voltage that remains on the DUT. To further ensure safety, the interlock connector can also be used as double protections to prevent inadvertent operation.
The GPT-9800 Series, equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allows operators to interpret measurement results easily and quickly. All major test functions, including AC withstanding (AC 5kV/40mA), DC withstanding (DC 6kV/10mA), insulation resistance (DC 50V ~ 1000V) and ground bond (AC 30A max.) tests, are performed under a high-stability voltage output with high-resolution measurement results. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results.
Other functions and features of the GPT-9800 include: open circuit detection for ground bond testing to get correct measurement result with confidence; 100 sets of memory to save panel settings, which can be recalled for single test individually or for automatic tests in sequence; a remote output on-off terminal in the front panel and a signal I/O port in the rear panel provided as the means for remote start/stop control of the safety tester; RS-232C, USB and GPIB (optional) interfaces available for PC remote control and test result logging.
- High Efficiency and High Stability Output
- High Accuracy and High Resolution Testing Performance
- Safety Guarding throughout the Testing Period
- Multiple Protection Mechanisms
- Friendly User Interface
- High Efficiency and High Stability Output
[caption id="attachment_737440" align="alignnone" width="567"]
Máy kiểm tra an toàn điện GW INSTEK GPT-9800 seri[/caption]
Đặc trưng Máy kiểm tra an toàn điện GW INSTEK GPT-9600 seri
- 200VA AC Test Capacity
- 240x64 Ice Blue Dot matrix LCD
- Manual/Auto Mode
- Function Key for quick selecting
- High intensity flash for Caution & Status indication
- Safety INTERLOCK function
- Zero Crossing Turn-on Operation
- Controllable Ramp-up Time
- RMS Current Measurement
- High resolution: 1uA for measuring current, 2V for setting voltage
- PWM amplifier to enhance the power efficiency and reliable testing
- Max. 100 memory block for test condition (step) setting. And each step can be named individually.
- Remote terminal on the front panel for “start” and “stop” control
- Interface : RS-232C, USB device, Signal I/O and GPIB (optional)
Thông tin đặt hàng GPT-9800: Các model của GPT-9800 seri
Quick Start Guide x1, CD x1(completed user manual),
Power cord x1, Interlock key x1,
Remote terminal Cable GHT-119 x1,
Test lead GHT-114 x1 for GPT-9803/9802/9801
Test lead GHT-114 x1, GTL-215 x 1 for GPT-9804
Option
GPT-9KG1 GPIB card
GSB-01 Multiplex Scanner Box (8CH H.V)
GSB-02 Multiplex Scanner Box (6CH H.V./2CH G.B.)
Optional Accessories
GHT-113 High Voltage Test Pistol
GHT-117 High Voltage Adapter Box
GHT-118 High Voltage / Ground Bond Adapter Box
GHT-205 High Voltage Test Probe
GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer, Approx. 2000mm
GTL-247 USB Cable, A-A type, approx. 1800mm
GTL-248 GPIB Cable, approx. 2000mm
GRA-417 RACK Mount Kit (19”, 4U)
| Model \ Func. |
GPT-9804 |
GPT-9803 |
GPT-9802 |
GPT-9801 |
| AC WITHSTANDING |
v |
v |
v |
v |
| DC WITHSTANDING |
v |
v |
v |
× |
| INSULATION RESISITANCE |
v |
v |
× |
× |
| GROUND BOND |
v |
× |
× |
× |
[caption id="_0" align="alignnone" width="2111"]
Thông tin đặt hàng GPT-9800: Các model của GPT-9800 seri[/caption]
Bình luận