Specifications
- Capacity: 760 liters
- Control:PID controller
- Temperature:
- Temperature range: -5~85℃
- Volatility: 0.3℃
- Variation: ±0.7℃
- Humidity:
- Humidity range: 20~85%
- Volatility: 3%
- Variation: 5%
- Light source: Cool White, Ultraviolet, Light uniformity
- Time: heating: 25min (20℃ → 85℃)
- : cooling: 35min (20℃ → -5℃)
- Cooling system: Air-cooled/ R-404A
- : Power: 470 W
- Materials: Ni-Cr Wire Heater / SUS Tube Heater, SUS # 304, Polyurethane
- Sensor: Temperature: Pt100
- : Humidity: Electronic sensor
- Operating temperature: 18℃ to 30℃
- Water tank: capacity: 15 liters/ pH6.2~7.2
- Communication: Basically RS-232C, [RS-485 : optional]
- Cable: Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2")
- Dimensions: Inside:750×880×1160mm
- : Outside: 1220×1215×1965mm
- Weight: 400±10 kg
- Power supply: AC230V, 1ph, 50Hz 23.5 A Cat.No. AAHC1012K
Thông tin đặt hàng
| Model | TH-ICH-300 | TH-ICH-800 | ||
|---|---|---|---|---|
| Chamber volume (L / cu ft) | 300 / 10.6 | 760 / 26.8 | ||
| Controller | PID control (LCD Type) | |||
| Temperature 1) | Range | without humidity (℃ / ℉) | -5 to 85 / 23 to 185 without Light 0 to 85 / 32 to 185 with Light | |
| with humidity (℃ / ℉) | +15 to 85 / 59 to 185 with Light | |||
| Fluctuation 1) (±℃ / ℉) at 40℃ / 60%RH | 0.3 / 0.55 | 0.3 / 0.55 | ||
| Variation 1) (±℃ / ℉) at 40℃ / 60%RH | 0.5 / 0.9 | 0.7 / 1.3 | ||
| Time | Heating | 25min (20℃ → 85℃) | 30min (20℃ → 85℃) | |
| Cooling | 35min (20℃ → -5℃) | 40min (20℃ → -5℃) | ||
| Humidity | Range (%RH) | 20 to 85 ※ See page 231 for more detailed humidity range check. | ||
| Fluctuation 2) (±%RH) at 60%RH / 40℃ | 3 | |||
| Variation 2) (±%RH) at 60%RH / 40℃ | 5 | |||
| Light source (ICH Q1B option 2) | Cool white 3) | 6,000 lux | 6,500 lux | |
| Ultraviolet-A 3) | 4.5 W/㎡ | 5 W/㎡ | ||
| Light uniformity | VIS. : ±10%UVA : ±15% | VIS. : ±15%UVA : ±15% | ||
| Typical time required to reach ICH Recommendation of 1.2 million lux-hr | ≒ 200Hr | ≒ 184Hr | ||
| Typical time required to reach ICH recommendation of 200 W-hr/m2 | ≒ 50Hr | ≒ 40Hr | ||
| Refrigeration | System | Air - cooled | ||
| Refrigerant | R- 404A | |||
| Water tank | Capacity (L / cu ft) | 15 / 0.53 | ||
| Water quality | pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below | |||
| No. of wire shelves (standard / max.) | 2 / 8 | 2 / 17 | ||
| Distance of between shelves (mm / inch) | 60 / 2.4 | 60 / 2.4 | ||
| Max. load per shelf (kg / lbs) | 25 / 55.1 | 40 / 88.2 | ||
| Permitted total load (kg / lbs) | 75 / 165.3 | 100 / 220.5 | ||
| Dimension (W×D×H) | Interior (mm / inch) | 750×650×650 / 29.5×25.6×25.6 | 750×880×1160 / 29.5×34.6×45.7 | |
| Exterior (mm / inch) | 1130×985×1520 / 44.5×38.8×59.8 | 1220×1215×1965 / 48×47.8×77.4 | ||
| Net weight (kg / lbs) | 280±10 / 617±22 | 400±10 / 882±22 | ||
| Cable port | Basically one hole provided / Ø 50mm (2”), Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2”) | |||
| Interface port | Basically RS-232C, [RS-485 : optional] | |||
| Electrical requirements | AC230V, 1ph, 60Hz | 14.7 A | 23.5 A | |
| Cat.No. | AAHC1005K | AAHC1015K | ||
| AC230V, 1ph, 50Hz | 14.7 A | 23.5 A | ||
| Cat.No. | AAHC1005K | AAHC1015K | ||
Brand: JEIOTECH
Description
JEIOTECH TH-ICH-800 Pharmaceutical Stability Test Chamber (760L, -5~85℃, 20~85%)
Brand
Brand
JEIOTECH
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “JEIOTECH TH-ICH-800 Pharmaceutical Stability Test Chamber (760L, -5~85℃, 20~85%)”
You must be logged in to post a review.
Reviews
There are no reviews yet.